The reason for closing the outlet valve before starting the centrifugal pump. First, make sure that there are two points before the operation of the centrifugal pump: 1. The significance of filling the pump with water is to establish a vacuum. 2. Be sure to close the valve on the outlet, so that the...

TMC series according to overseas customer requirements of pump body and explosion-proof motor, bottom drag appearance color is avocado green color, pump material is made of 304,316L, 316L, the grinding material is made of silicon carbide to silicon carbide material, the two release will form a liqui...

TMF- fluorine lined magnetically driven chemical pump Analysis of common problems of TMF magnetic pump: The main results are as follows: 1. The problems caused by cavitation of the magnetic pump: the main causes of the pump are the large resistance of the pump inlet pipe, the more gas phase of the c...

ZCQ series self-priming magnetic drive pumps use seals instead of dynamic seals, so that the over-current parts of the pump are completely sealed, which completely solves the disadvantages of running, dripping and leakage that can not be avoided by other pump mechanical seals. The materials of the p...

GDF Teflon pipe centrifugal pump GDF Teflon pipe vertical centrifugal pump is manufactured by full plastic hot melt molding process, the pipe pump is made of 45 steel lined with polyperfluoroethylene propylene, the impeller is made of fluoroplastic alloy, the pump shell and pump cover are made of po...

UHB-ZK corrosion-resistant and wear-resistant mortar pump desulphurization pump UHB-ZK corrosion-resistant and wear-resistant mortar pump series products are designed to be corrosive and contain fine particles or crystalline medium. corrosion-resistant and wear-resistant mortar pump is a kind of cen...

FSB- fluoroplastic alloy centrifugal chemical pump and matters needing attention The pump body and impeller of FSB- fluoroplastic alloy centrifugal chemical pump are made of fluoroplastic alloy, the pump cover is made of F46 (FEP) with TH200 lining, the sealing ring is made of fluororubber, the mech...

Material and introduction of Teflon Magnetic Drive pump TMF fluoroplastic magnetic pump is mainly composed of shell, static ring, moving ring, impeller, spindle, shaft sleeve, isolation sleeve, strengthening sleeve, bracket, external magnetic, and other components. Its shell is made with HT200 ...

IHF Teflon lined chemical centrifugal pump TEFLOW PUMPS IHF Teflon-driven centrifugal pump, also known as chemical pump, single-stage single-suction fluoroplastic alloy chemical centrifugal pump, this pump can withstand the corrosion of almost all media. For example: hydrofluoric acid special pump, ...

Fluorine-lined high temperature magnetic pump Fluorine-lined high-temperature magnetic pump is a brand-new magnetic pump designed according to high temperature conditions on the basis of classical fluorine-lined magnetic pump. The whole series of flattening uses the high temperature resistant f...