The TMC series stainless steel magnetic pump operates on the principle of magnetic drive, eliminating the need for seals to achieve a leak-free performance. Constructed from stainless steel materials, it is particularly well-suited for transporting corrosive substances such as acids, alkalis, and organic solvents. This pump conforms to API 685 standards.
read moreThe MIP Series Lined Plastic Slurry Pump is suitable for conveying various types of slurries, such as phosphoric acid slurry, fluorosilicic acid containing silica gel, mother liquor, etc. It is also suitable for wet-process metallurgical operations involving acids, corrosive mineral slurries, and electrolytes. Additionally, it can be used in acid pickling systems, wastewater with impurities, and other industries. This pump is suitable for both clear liquids and slurries.
read moreFZB fluorine plastic self-priming pump, according to international standards, overflow parts are fluorine plastic, load-bearing parts are made of metal materials, can be equipped with external single-end machine seal, external assembly machine seal and flushing water, can be customized.
read moreIH stainless steel single stage seawater salt water centrifugal pump can be made of 304.316.316L and super dual phase steel stainless steel. It is an excellent transfer pump and unloading pump for transporting various concentrations of seawater, salt water and organic solvents.
read moreThe new Tenglong Pump and Valve plant is about to be put into use, marking the company's entry into a new stage of development. This is not only an im
Application range of UHB-ZK corrosion-resistant and Wear-resistant Desulfurization pump. UHB-ZK corrosion-resistant and wear-resistant mortar pump is a single-stage single-suction cantilever centrifugal pump with steel lined ultra-high molecular weight polyethylene (UHMWPE) (UHMWPE). This material i...
The fluoroplastic self-priming pump can automatically lining the centrifugal pump pumped up with water as the self-priming pump without having to fill the pipe with water. Before the start of the self-priming pump, the pump body is now filled with water (or there is water in the pump body itself). A...
The self-priming of the self-priming pump refers to starting the pump without filling water in the suction tube (but there must be enough water in the pump body). It has the function of starting to remove the gas in the suction pipe and steps into normal operation after a very short period of time. ...
Application of stainless steel self-priming centrifugal pump. ZX self-priming pump is a horizontal self-priming centrifugal pump suitable for urban environmental protection, construction, fire fighting, chemical industry, pharmaceutical, electric power, electroplating, petroleum, mining, equipment c...
The reason for closing the outlet valve before starting the centrifugal pump. First, make sure that there are two points before the operation of the centrifugal pump: 1. The significance of filling the pump with water is to establish a vacuum. 2. Be sure to close the valve on the outlet, so that the...
TMC series according to overseas customer requirements of pump body and explosion-proof motor, bottom drag appearance color is avocado green color, pump material is made of 304,316L, 316L, the grinding material is made of silicon carbide to silicon carbide material, the two release will form a liqui...
TMF- fluorine lined magnetically driven chemical pump Analysis of common problems of TMF magnetic pump: The main results are as follows: 1. The problems caused by cavitation of the magnetic pump: the main causes of the pump are the large resistance of the pump inlet pipe, the more gas phase of the c...
ZCQ series self-priming magnetic drive pumps use seals instead of dynamic seals, so that the over-current parts of the pump are completely sealed, which completely solves the disadvantages of running, dripping and leakage that can not be avoided by other pump mechanical seals. The materials of the p...
GDF Teflon pipe centrifugal pump GDF Teflon pipe vertical centrifugal pump is manufactured by full plastic hot melt molding process, the pipe pump is made of 45 steel lined with polyperfluoroethylene propylene, the impeller is made of fluoroplastic alloy, the pump shell and pump cover are made of po...
UHB-ZK corrosion-resistant and wear-resistant mortar pump desulphurization pump UHB-ZK corrosion-resistant and wear-resistant mortar pump series products are designed to be corrosive and contain fine particles or crystalline medium. corrosion-resistant and wear-resistant mortar pump is a kind of cen...
the professional team to service !