Two sets of UHMWPE vertical submerged centrifugal pumps are sent to Mexico The shell and impeller of FYH- long shaft vertical chemical centrifugal pump are made of fluoroplastic alloy, the packing is made of PE, the nut and pump shaft are lined with 45 steel F46 (polyperfluoroethylene propylene), th...

The pump shell of TMF-G Teflon high temperature magnetic drive pump is made of F46 material lined with HT200, the spindle, static ring and shaft sleeve are made of SIC or SSIC material, the moving ring is made of tetrafluoro material, the impeller is made of polyperfluoroethylene propylene and neody...

IH stainless steel single-stage single-suction seawater salt water centrifugal pump IH stainless steel chemical centrifugal pump using mechanical seal points for attention: 1. As the mechanical seal is generally suitable for use in clean, non-suspended particle media, the newly installed pipeline sy...

Instructions for the use of FSB-L Teflon alloy centrifugal pump: Start and stop. 1. Stop the liquid in the water pump (drain the liquid). 2. Check whether the oil level of the support oil chamber is within the prescribed range. 3. Check the running direction of the motor and check the placement mark...

CQB fluoroplastic magnetic pump is a new type of pump which applies the principle of modern magnetic mechanics and uses the magnetic drive of permanent magnet to realize the contactless transmission of torque, that is, when the motor drives the outer magnetic steel assembly to rotate, the magnetic f...

FZB- Teflon chemical centrifugal self-priming pump material and medium, self-priming installation requirements. The overflowing parts of FZB- fluoroplastic self-priming centrifugal pump are made of fluoroplastic, its front cover, pump cover, pump body and connecting flange are all made of TH200 lini...

TMF-fttings and materials of Teflon magnetic drive pump TMF- series fluorine-lined magnetic pump impeller is made of F46 and NdFeB. NdFeB magnet has strong magnetocrystalline anisotropy and high saturation magnetization. Pump impeller: it is a key component for transporting liquid. The centrifugal i...

TMC-P stainless steel magnetic pump. The structural parts of TMC-P stainless steel magnetic pump are composed of shell, impeller, moving ring, front axle, shaft sleeve, spindle, rear cover, shaft sleeve, rear bearing, moving ring, isolation sleeve, external magnetic, bracket, etc. are made of (304,3...

IHF-D fluorine-lined centrifugal pump is an improved product of IHF fluorine-lined centrifugal pump. what is more acid-resistant than other pumps is that the flow parts that can withstand any strong acid (hydrofluoric acid, fuming sulfuric acid, nitric acid, fluorosilicic acid, etc.) are made of flu...

GDF Teflon lined vertical pipeline pump CDF series over-current parts are manufactured by high temperature annealing process, a new type of pipeline centrifugal pump with strong corrosion resistance. The pump impeller is directly connected to the motor through the support, the structure is compact, ...